0.052sec Super Speed Programmable Brushless RC Servo(A81BHP)

$99.99 piece
83 Available goods
View Details
Brand:
AGFRC
Iterm Name:
A81BHP
Signal Mode:
Digital
Control System:
Pulse width modulation control
Refresh Rate:
333Hz
Neutral Position:
1520uS
Dead band:
2 uSec
Operating Voltage:
4.8V~8.4V
Operating Travel:
180°±10°
Mechanical Angle:
220°
Signal Range:
500 to 2500 uSec
Angle Sensor:
Potentiometer
Temperature:
-15C°~ +70C°
Motor Type:
Brushless
Motor Drive:
FET Drive
Horn Gear Spline:
25T-φ5.92mm
Programmable:
Yes
Bearing:
Three Ball Bearings
Bearing Material:
Metal
Gear Material:
Strength Steel
Case Material:
AL6061T6
Certification:
CE,FCC,RoHs
Wire Guage:
TYU 300mm / 22AWG
Net Weight:
81g(2.86oz)
Product Size:
40*20*37.5mm(1.57*0.79*1.48in)
AGFRC 0.052sec @ 8.4V High Speed 23KG High Speed Programmable Digital Brushless Servo for 1/10 1/8 RC Crawler Buggy Truck (A81BHP) 

If you are looking for one reliable and with faster speed servo for 8th scale model, you can't miss this A81BHP. 23KG torque and 0.052Sec super speed @ 8.4V. Ideal choice for the device or model request high speed.


Fully upgrade from design and material for the whole servo, incredibly hardened stainless steel gears and pin shaft, superb reliable and smooth three ball bearings, wide-voltage capability to avoid additional adapters or regulators, super power brushless motor, which delivery ultra high torque and high speed in standard size with low current consumption. Dust and water resistant enable to run on the wet glass. Besides, it also continue programmable feature , which enable to adjust the servo parameter by USB programmer for different application. 

 Main Features 

  • Heat Sink Fast Cooling Design
  • Robust Steel Gears and Shafts
  • Super Strong Three Ball Bearings
  • Long Lifespan Brushless Motor
  • Programmable Digital Circuit
  • Lightning-Quick Speed
  • High-Voltage Compatible
  • Splash and Dust Resistant
  • Aluminum Single Arm Servo Horn
  • Ideal for Any 1/10 to 1/8 Scale Vehicle Application (such as 1/8 On-Road Cars, 1/10 Nitro Touring, even 1/8 EP and GP Buggies)

 Specification 

  • Model Name: A81BHP
  • Operating Voltage: 4.8-8.4V
  • Operating speed: 0.070sec/60° @ 6.0V
  • Operating speed: 0.060sec/60° @ 7.4V 
  • Operating speed: 0.052sec/60° @ 8.4V 
  • Stall Torque: 16 kg-cm (222 oz-in) @ 6.0V
  • Stall Torque: 19 kg-cm (264 oz-in) @ 7.4V
  • Stall Torque: 23 kg-cm (320 oz-in) @ 8.4V 
  • Gear: Steels
  • Motor: BLS
  • Size: 40*20*37.5mm (1.57 x 0.78 x 1.47 in)
  • Weight: 78g 
  • Connector Wire: TYU 300mm

 Download Spec Datasheet 

​Please click HERE to download the spec datasheet for the A81BHP servo.