AGFRC A19DLM IP67 Magnetic Encoder Digital Servo

AGFRC A19DLM 4kg High Voltage IP67 Digital RC Servo with Magnetic Angle Sensor Titanium Gears Aluminum Case and 25T-5.92mm Spline
➤ The AGFRC A19DLM is a compact high-voltage digital RC servo with an IP67-rated design and magnetic angle sensing for responsive and consistent control. Operating from 4.8V to 8.4V, it delivers up to 4.0kg-cm of stall torque and reaches 0.088s/60° at 8.4V. Its programmable PWM control, aluminum case, titanium gears and IC drive make it a practical choice for compact RC applications where durability and precise control are important.
➤ With a 22.9 × 12.8 × 22mm body, 19g net weight and 25T-Ø5.92mm output spline, the A19DLM is easy to integrate into space-limited RC builds. The servo supports 180° ±10° operating travel, a 333Hz refresh rate and a 500-2500μSec signal range, and includes two plastic horns and mounting screws for installation.
Main Features
● IP67-Rated High-Voltage Servo Design
● Magnetic Angle Sensor for Consistent Position Control
● Up to 4.0kg-cm Stall Torque at 8.4V
● 0.088s/60° High-Speed Response at 8.4V
● Titanium Gear Train with Aluminum Case
● Programmable PWM Digital Control with 333Hz Refresh Rate
● 25T-Ø5.92mm Spline for Compatible RC Servo Horns
● Compact 19g Body with 350mm Cable
Applications
➤ Recommended for 1/16 to 1/10 RC cars crawlers trucks aircraft boats helicopters robotics and other compact models that support a compatible 25T-Ø5.92mm servo spline and 4.8V-8.4V power system.
Specifications
Operating Voltage
4.8V - 8.4V
Temperature Range
-15°C - +70°C
Refresh Rate
1520 μS / 333Hz
Travel Angle
180 ± 10°
Programmable
Yes
Case Material
Aluminum
Gear Material
Strength Steel
Sensor Type
Magnetic Sensor
Motor Type
DC
Bearing
2BB
Direction
CCW
Horn Gear Spline
25T-ɸ5.92 mm
Wire
TYU 350mm / 26AWG
Wire Color



Dimensions
22.9*12.8*22 mm (0.90 x 0.50 x 0.87 in)
Weight
19 g (0.67 oz)
Operating Speed
0.130 sec/60° @4.8V
0.110 sec/60° @6.0V
0.095 sec/60° @7.4V
0.088 sec/60° @8.4V
Stall Torque
2.2 kg·cm (30 oz·in) @4.8V
3.0 kg·cm (41 oz·in) @6.0V
3.5 kg·cm (48 oz·in) @7.4V
4.0 kg·cm (55 oz·in) @8.4V
PACKAGE INCLUDES
● 1 x A19DLM Servo
● 2 x 25T Plastic Horns
● 2 x Mounting Screws
● 1 x Horn Screw