AGFRC B13DLS V2 2.7kg High-Speed Digital RC Servo with Titanium Copper Gears IC Drive No-Limit Angle and 25T-4.94mm Spline
➤ The AGFRC B13DLS V2 is a high-speed programmable digital RC servo designed for quick and precise control in compact models. Operating from 4.8V to 8.4V, it reaches 0.072s/60° at 8.4V and provides up to 2.7kg-cm of stall torque. Its titanium and copper gears, IC drive and 333Hz PWM control combine fast response with flexible high-voltage operation.
➤ The B13DLS V2 features a no-limit mechanical angle, 180° ±10° operating travel and a compact 16g aluminum and plastic case. The main specification lists a 25T-Ø4.94mm output spline, while the included plastic horns are listed as 25T-Ø5mm, so the spline and horn fit should be confirmed before installation.
Main Features
● 4.8V-8.4V High-Voltage Operation
● 0.072s/60° High-Speed Response at 8.4V
● Up to 2.7kg-cm Stall Torque at 8.4V
● Titanium and Copper Gear Train with IC Drive
● No-Limit Mechanical Angle with 180° ±10° Operating Travel
● Programmable PWM Digital Control with 333Hz Refresh Rate
● Compact 16g Aluminum and Plastic Case
● 25T-Ø4.94mm Main Spline with Four Plastic Horns Included
Applications
➤ Recommended for 1/18 to 1/10 RC cars crawlers aircraft boats robotics and other models that support the listed spline and 4.8V-8.4V power system.
Operating Voltage
4.8V - 8.4V
Temperature Range
-15°C - +70°C
Refresh Rate
1520 μS / 333Hz
Case Material
Aluminum+Plastic
Horn Gear Spline
25T-ɸ4.94 mm
Dimensions
22.8*12*29.4 mm (0.90 x 0.47 x 1.16 in)
Operating Speed
0.090 sec/60° @4.8V
0.080 sec/60° @6.0V
0.076 sec/60° @7.4V
0.072 sec/60° @8.4V
Stall Torque
1.6 kg·cm (22 oz·in) @4.8V
2.0 kg·cm (27 oz·in) @6.0V
2.4 kg·cm (33 oz·in) @7.4V
2.7 kg·cm (37 oz·in) @8.4V
Package Includes
● 1 x B13DLS V2 Servo
● 4 x 25T Plastic Horns
● 3 x M2*8*φ5.1mm Screws
● 1 x M2.5*4mm Screw